Adjusting AuditLok XL

The procedures to adjust AuditLok XL for daylight savings depend on the version of software and electronics.

Pre-2008 AuditLok XL (Standard Software 2.41)

These instructions are for the standard version software used on AuditLok XL used up until the new electronics were released in early 2008.

Your safe key (# 3 to # 7) will enable you to make this change. Twice a year the time needs to be adjusted to account for Daylight Savings Time (DST). DST is controlled by a factory set window. It may only be “SET” to DST in March/April and “REMOVE” in October/November. If you have any problems with these processes, contact your District Manager. For any unusual problems with DST, contact NKL Technical Service at (800) 452-4655.

• Use the arrow buttons on the right hand side of display to make selections in the following steps.
• Present your key and enter your PIN code
• Select “SUPERVISORY”
• Select “TIME”
• Select “DAYLIGHT SAVINGS”
• Select “SET DST”
• Select "DONE" to accept the change and exit.
• Press “ESC/0" Button as needed until the main screen appears

Detailed Daylight Savings Instruction Sheet

Pre-2008 AuditLok XL (Keyless Software 2.53)

These instructions are for the optional (upgrade) keyless version software (available (May 2005 to December 2007). This software version includes an auto-DST feature. When enabled, the clock adjusts automatically for DST according to the USA Pre-2007 schedule. Manager level (#5 or higher key) users may enable or disable the Auto-DST feature. There are two options for dealing with daylight savings:

Option 1: Auto-DST on Wrong Dates
When Auto-DST is on, this version shift on the wrong dates (old schedule). This may be a minor inconvenience for a few weeks each spring and fall, but there will be no need to contact the factory when time changes.

Option 2: Manual Clock Adjustment
The clock may only be adjusted (by more than two minutes) by contacting NKL Technical Service (1.800.452.4655) for an override. This should be done as soon as reasonably possible after a spring or fall time change.
 

2008 AuditLok XL (New Electronics, Versions prior to 1.0)

These instructions are for the new AuditLok XL electronics with software versions less than 1.0. This includes all AuditLok XL electronics produced on safes within the serial number range SP2008xxxxxx to SP2009006037.

This product includes an auto-DST feature. When enabled, the clock will automatically adjust for daylight savings on the proper dates according to the 2007 USA schedule. Users outside the USA must log in at Administrator level and change their clocks manually.

To enable or disable Auto-DST:

• Manager or Administrator: Present your key and enter your PIN code
• Select “SUPERVISORY”
• Select “TIME”
• Select “DAYLIGHT SAVINGS”
• Select “YES*” to enable or "NO*" to disable automatic DST adjustment.
• Select "DONE".

To Manually Adjust the Clock:

• Administrator: Present your key and enter your PIN code
• Select “SUPERVISORY”
• Select “TIME”
• Select “TIME”
• Select the line showing the current time then use the number pad to enter the new time.
• Select "DONE".

 

2008 AuditLok XL (New Electronics, Version 1.0 and above)

These instructions are for safes with the new AuditLok XL electronics with serial number SP2009006038 or higher.

Rather than computing the date based on the USA 2007 Daylight Savings schedule, the dates for upcoming spring and fall DST adjustments are entered manually. The safe then adjusts for DST automatically on the preset dates.

To enable or disable Scheduled DST:

• Manager or Administrator: Present your key and enter your PIN code
• Select “SUPERVISORY”
• Select “TIME”
• Select “DAYLIGHT SAVINGS”
• Select “ACTIVATE DST” to switch between "YES" and "NO".
• When "ACTIVATE DST" is set to "YES": Select "SPRING" to enter the next spring DST date then select "FALL" to enter the next fall DST date.
• Select "DONE".

To Manually Adjust the Clock:

• Administrator: Present your key and enter your PIN code
• Select “SUPERVISORY”
• Select “TIME”
• Select “TIME”
• Select the line showing the current time then use the number pad to enter the new time.
• Select "DONE".