AuditLok XL now available in two versions. Standard version has no changes. "Keyless-Streaming" version allows users to be enrolled keyless (#2 key permissions) and has a constant audit data flow to the printer port for Image Vault capture.

New door sensors.

Dust cover and coin racks changed for improved production quality and efficiency.

Dec. 2003

Different wire colors for alarm output cable. Contact NKL Technical Support if you have to wire the alarm output and the cable labels are removed.

SP2003049107

A new anti-pry flap has been added to the manual drop assembly on all "Premium" hardware intellisafe models. Since this is part of the assembly, no service part numbers have changed.

SP2003049107

Starting with this SN, all BSD2620 units now use the new white plunger switch mounted to a bracket on the hinge side of the door. The post which forces the inner door closed has also changed as a result, but requires no change to user operating procedures. The new outer door cable is 15025901 (includes plunger assembly) and the new inner door cable is 15025825.

SP2003049081

Starting with this SN, all BSD4125 Right Hand units now use the new white plunger switch mounted to a bracket on the hinge side of the door. The post which forces the inner door closed has also changed as a result, but requires no change to user operating procedures. The new outer door cable is 15025826 (includes plunger assembly) and the new inner door cable is 15025825.

SP2003049010

Starting with this SN, all BSD2920 units now use the new white plunger switch mounted to a bracket on the hinge side of the door. The post which forces the inner door closed has also changed as a result, but requires no change to user operating procedures. The new outer door cable is 15025901 (includes plunger assembly) and the new inner door cable is 15025825.

SP2003033091

Stopped using boltwork cam 700308, began using boltwork cam 10000001 (new part is actually the original cam which matches service manual documents).

SP2003031001

Began using reversable LaGard lock on outer door (T15016000)

SP2003026001

A blue or gold outer display may be replaced with a blue outer display. Never replace a blue display with a gold display. Starting with SN SP2003026001 all AuditLok XL electronics will use the blue outer board. Battery backup is no longer used and batteries should not be installed or replaced in units using the "L-Pac" power supply.

First serial # w/cassette shipped outside of V1 & V2.

SP2002020141

The is the first safe with the Mas Hamilton lock (the reversible lock bolt RH or LH T-15017000)

SP2002017073

This is the first Premium XL w/o the extension cable.

NK2002005001

All Premium B-Rate safes will be checked for correct door sensor adjustment and Lagard Lock sensor working correctly.

NK2002001001

The power extension cable has been replaced with all XL and XLVs

NK2001045000

All Premium safes have a heatsink in the display board.

NK2001044XXX

All Starbucks safes, BSD2620s, will have battery backups installed.

NK2001032115

All Premium Safes will now have the Intellisafe logo on them.

NK2001032010

The is the first serial number with the gold display board (T-15025000), there was a mix of old and new boards the week before.

NK20010150XX

The Lagard 6000 series lock was installed on all safes, starting on the 10th week we were going back and fourth till the 15th week. The lock that is in the safe is on the sage inspection sheet.