Brands: FireKing & Gary · Image Vault · Perfect Cash · NKL · McGunn · EXL Safe · Adesco · Meilink

Home » Support

Files
CCTV
Safes
- Dials
- Keypads
- Sherlock
- Easy Series
- AuditLok XL
  > XL Simulator
- AuditLok XLV
  > XLV Simulator

Keypad Electronic Combination Locks

FireKing Security Group uses digital locks by LaGard or Sargent & Greenleaf depending on the application.

LaGard Digital Keypads

There are several LaGard digital combination locks available for various FireKing Security Group safe brands. For complete instructions on any of these digital keypad systems select the corresponding PDF document below.

	Sales Cut Sheet User Instructions 4100 Lock Instructions 4200 Lock Instructions

	Sales Cut Sheet User Instructions Control Code Instructions 4300/6250/6040 Lock Instructions Audit Setup Software (ZIP) LGView Audit Software (ZIP)

	Sales Cut Sheet User Instructions 4100 Lock Instructions 4200 Lock Instructions

	Sales Cut Sheet User Instructions Install Instructions 4100 Lock Instructions 4200 Lock Instructions

	Sales Cut Sheet User Instructions 3040-DB Lock Instructions 3740-2 Lock Instructions

	Sales Cut Sheet User Instructions 4100 Lock Instructions 3040-DB Lock Instructions 3045 Hand Held Programmer Instructions

	Sales Cut Sheet User Instructions 4100 Lock Instructions 4200 Lock Instructions

	Installation Instructions User Instructions

	Sales Cut Sheet User Instructions Control Code Instructions Deadbolt Lock Instructions Swingbolt Instructions 4300/6250/6040 Lock Instructions LPAudit Setup Software (ZIP) LGView LPAudit Software (ZIP)

	Sales Cut Sheet User Instructions 4100 Lock Instructions 4200 Lock Instructions 4300/6250/6040 Lock Instructions 3040-DB Lock Instructions 3740-2 Lock Instructions

	Sales Cut Sheet User Instructions 4100 Lock Instructions 4200 Lock Instructions 3045 Hand Held Programmer Instructions

	Sales Cut Sheet User Instructions

	Sales Cut Sheet Installation Instructions User Instructions Manager Instructions Master Instructions Audit Instructions Setup Instructions Software Installation Instructions SmartLinc Setup Software (ZIP) SmartLinc Audit Software (ZIP)

S&G 6120/6123 Digital Keypad

6120 Operation and Programming Instructions

6123 Operation and Programming Instructions

Training Guide

Troubleshooting Guide

Reset Instructions


S&G 6120 Keypad: Front	S&G 6120 Keypad: Back

Changing the Master Code
1. Press 74.
2. Press *.
3. Enter the existing six-digit Master Code.
4. Press #1*.
5. Enter the new six-digit Master Code.
6. Press #.
7. Enter the new six-digit Master Code again.
8. Press #. The lock will emit 3 disticnt chirps if the new code is accepted. If a long tone is heard the code is not accepted.

Changing/Adding a User Code
1. Press 74.
2. Press *.
3. Enter the six-digit Master Code.
4. Press #.
5. Enter the user number (2 through 9).
6. Press *.
7. Enter the new six-digit user code.
8. Press #.
9. Enter the new six-digit user code again.
10. Press #. The lock will emit 3 disticnt chirps if the new code is accepted. If a long tone is heard the code is not accepted.

Deleting a User Code
1. Press 74.
2. Press *.
3. Enter the six-digit Master Code.
4. Press #.
5. Enter the user number (2 through 9).
6. Press *##. The lock will emit 3 disticnt chirps to indicate the user is deleted.

S&G 6120 Lock Won’t Open
1. Replace the batteries. Make sure to use good quality alkaline batteries: Energizer (first choice) or Duracell (second choice).
2. If the lock solenoid still does not pull back and the keypad appears to operate correctly try placing the batteries in series (18 Vdc). Otherwise replace the keypad.
3. Drill and replace the lock.